Build your own Rotating Clock Divider Breakout, with the RCDBO kit.
The Do-it-yourself kit includes all the parts necessary to build a fully-featured RCD Breakout. This is a beginner-level kit, you need only minimal prior experience, but you must have some basic hand tools (flush snips, needle-nose pliers, and a wire stripper).
Divide-by-1 to Divide-by-64, on 8 output jacks
CV Rotate jack to shift divide-by amount on each jack
Clock Input (5V to 15V clock, rising edge triggered), max 3kHz
CV Rotate (0V to +5V input)
CV Reset (5V to 15V trigger)
Divided Clock Outputs (8 jacks):
...where R is the CV Rotation.
Selectable Gate/Trigger mode:
Selectable Divide range up to Divide-by-64: Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.
Selectable Auto-reset: Auto-reset will reset the divide counter every 16/24/32 clocks, which keeps the beats more "dance-able" even when using the "weird" clock divisions (3/5/6/7/9/10/11/etc..) Two jumper pins on the back can be pre-set with jumpers plugs, or used with (forthcoming) breakout panel.